Six – Foot Dome Products
The purchase of any size dome is made through contact with a Technical Innovations Associate with payment of a 25% deposit.
Six-Foot Dome Options
|Product Name: Six-foot dome “short”|
|Part Number: HD6|
|Price (US $): 4,495.00|
Product Description: The HD6, six-foot dome “short”, is designed for mounting upon an existing structure. The dome comes with a 9″ high “Base Ring” which contains the rotation system. The complete dome is 3’10” high on the inside and weighs only 110 pounds assembled. The outside diameter of the Base Ring is 72″ and the 3″ mounting flange turns to the inside. The shutter is a full 30″ wide and opens 12″ past the zenith.
|Product Name: Six-foot dome “tall”||
|Part Number: PD6|
|Price (US $): 6,495.00|
Product Description: The PD6, six-foot dome “tall”, is designed for a stand-alone installation, most often on a concrete pad or deck. The dome comes with a 45″ high wall with a reverse flange, with a built-in 19″ wide door. The complete dome is 6’10” high at the zenith on the inside. The outside diameter of the wall is 72″ and the 3″ mounting flange turns to the inside. The shutter is a full 30″ wide and opens 12″ past the zenith.
Six-Foot Dome Accessories
|Product Name: PD6 Computer Cubby||
|Part Number: CC6|
|Price (US $): 850.00|
|Product Description: The computer cubby can be molded into any (or all) of the three 45″ high wall sections making up the PD6 observatory. Increases dome floor area by providing a recess in dome wall for working with your computer and or observatory accessories. The cubby size is 30″ wide by 16″deep by 40″ high.
|Product Name: Rectangular Skirt|
|Part Number: RS6|
|Price (US $): 950.00|
Product Description: Four-piece fiberglass skirt to make the transition between the circular observatory base ring and a flat or sloping roof or building edge. The horizontal flange of the RS6 fastens to the underside of the base ring mounting flange, while a vertical flange attaches to your structure. The skirt slopes downward 4 inches to the 6”6.75″ square wall. The skirt can completely support the 110 pound HD6 without additional structural support.
|Product Name: PD6 Computer Cubby Add-on||
|Part Number: CC6A|
|Price (US $): 775.00|
|Product Description: When initially ordered as a part of the PD6, the cubby is molded into the wall section as a single piece. The Computer cubby add-on allows the observatory owner to add the cubby after the fact. A hole is cut in the wall section and the cubby Add-on is pushed through from the inside. There are flanges completely around the cubby for bolting to the wall and weather sealing with the included silicone sealer.